Standard Operating Procedure

Print
Press Enter to show all options, press Tab go to next option

Standard Operating Procedure

 1.       Purpose

Permitting within the City of Richland Hills is a function of the Planning and Community Development Department and is charged with the enforcement of the 2012 International Building Code, 2012 International Residential Code, 2012 International Fire Code, 2012 International Plumbing Code, 2012 International Mechanical Code, 2012 International Property Maintenance Code, 2011 National Electric and other applicable codes as adopted by the City of Richland Hills.

The purpose of the codes are to provide minimum standards to protect the safety, health and general welfare of the public by regulating and controlling the design, construction, quality of materials, use and occupancy, location and maintenance of all buildings and structures through a program of permitting, plan review, inspection and enforcement.

2.       Scope

A permit application is required for all construction work with the only exceptions being those identified in the 2012 International Building Code and 2012 International Residential Code.  A partial list is included below. Construction work includes but is not limited to: new construction, demolition, remodels and additions; new mechanical, electrical, plumbing and structural systems; replacement or repair of mechanical, electrical, plumbing and structural systems with modifications; temporary power connections; irrigation system installations; and other types of projects such as signs, fences, driveway approaches and swimming pools. 

Work Exempt from a Building Permit 
The following are examples of work exempt from a permit as outlined in the 2012 IBC and IRC (not limited to this list):

  • Painting, papering, tiling, carpeting.

  • Hanging pictures, whiteboards, screens, wall mounted TV's and security systems.

  • Cabinets, countertops and similar finish work.

  • Fiber optic cables.

  • Repair of portable, nonfixed and movable fixtures.

  • Electrical - Ordinary repairs such as replacement of lamps or the connection of approved portable electrical equipment to approved permanently installed receptacles.

  • Mechanical – Portable heating appliance, ventilation equipment, cooling unit or evaporative cooler.

  • Plumbing – Stopping of leaks in drains, water, soil, waste or vent pipe. If it becomes defective and needs replacement with new material, such work is considered new work and a permit is required. Clearing of stoppages or repairing leaks in pipes, valves or fixtures and removal and reinstallation of water closets, provided such repairs do not involve or require the replacement or rearrangement of valves, pipes or fixtures.

3.       Prerequisites

Prior to any permit being issued, a permit application accompanied by plans and documents must be submitted to the City of Richland Hills Planning Department and all applicable permit fees paid to the City.  All applications must be legible and completely filled out, dated, and include the General, Electrical, Plumbing and Mechanical contractor information. 

All contractors performing work within the City of Richland Hills jurisdiction must be registered with the City, and provide a valid driver’s license, state licenses, and proof of commercial liability insurance with limits set by the City of Richland Hills Code of Ordinance Chapter 14 Section 14-35(c).

 4.       Responsibilities

All permit applications, plans and supporting documents are to be submitted to the permit technician (or designee) in the planning department.

All contractor registration applications and supporting documents are to be submitted to the permit technician (or designee) in the planning department.